Are you the camping type?  Or maybe you’re just the type of person who loves to mess with fire.  Well, whatever you are, you now have a chance to make your very own pocket stove. Simply pack your one ounce soda can stove and some Rubbing Alcohol and your set to make your very own Soda Can Pocket Stove!

Step 1:  Forming your soda can pocket stove!

Materials:

• Two identical soda cans
• Pliers
• 70% and above Rubbing Alcohol
• A thumbtack or pin
• A penny

Steps:

1. Cut the bottoms off both of the cans and throw the rest in the trash.
2. Crimp one of the cans using those pliers will grabbing and twisting it.
3. Stick the crimped can inside the normal can and twist to create a very tight seal.
4. **If you’d like, put some hot glue or a sealant to make sure the liquid doesn’t come out!

Step 2:  Punching holes…

Steps:

1. Grab the thumbtack or pin and start creating holes around the can as shown.
2. Create 7 to 8 holes in the middle close enough to make sure a penny can cover them all.

Step 3:  Fill and lighting

Steps:

1. Fill your can full of the rubbing alcohol using till it reaches the top of the penny.
2. Light the liquid on the top of the can on fire to cause the liquid inside to boil.
3. This will create a pressurized system where the liquid vapor will shoot through the holes creating a strong fast flame.
4. Enjoy!

More Fun

1. How To – Soda Can Tricks and Games
2. Snack Attack – Safeway Soda Is Cheaper then Water
3. How To – Make a Wallet With Cards

It’s been a while since the last How-To project, but that’s because they generally take a lot longer then other posts.  But, here you go, a simple way to create your own card wallet to impress your friends.  This takes about ten minutes to make, and is VERY simple to create!  This isn’t like a ductape wallet, you actually use the cards to support it instead of pure raw duct tape.  Anyways, enjoy!

Create the frame…

Materials:

• Clear Masking Tape
• Eight normal playing cards
  

Steps:

1. First gather four cards and your silly roll of clear masking tap.
2. Tap across on both sides across the cards like the picture above.
3. Repeat this two times to create the same thing.
   

Tape it all around…

Steps:

1. Once you have two, turn them sidewards and tape the two ends together, then squeeze them together to form the “wallet” shape. 
   
2. Tape the bottom together (to prevent stickiness from the inside).
3. Tape the two sides together to seal the wallet shape!
4. Clean up!  Tape back over any spots that seem to be sticky still.  Enjoy your wallet!
   

More Fun

1. How To – Making a Soda Can Pocket Stove
2. How To – Balloon Bomb Explosive
3. How To – Soda Can Tricks and Games